BC Dry Chemical Fire Extinguishers contain a siliconized Sodium Bicarbonate based dry chemical. Suitable for combating fires in flammable liquids and pressurized gases, these extinguishers are electrically non-conductive. Clean up after use is easier because the chemical by nature does not bake to a hot surface. These units are available in a range of sizes from 2 1/2 to 20lbs. capacity.

Halotron I is a "clean agent" HydroChloroFluoroCarbon discharged as a rapidly evaporating liquid which leaves no residue. It effectively extinguishes Class A and B fires by cooling and smothering and it will not conduct electricity back to the operator. Halotron is pressurized with Argon gas and is an EPA approved HCFC blend agent approved on Class A, B and C fires. It has a low GWP of 0.04 - 0.24, low ODP of 0.014 (twelve times lower than the EPA maximum allowable ODP of 0.20) and low Atmospheric Lifetime (3 1/2 to 11 years). Halotron is intended for use in areas formerly protected by Halon 1211 hand portable extinguishers such as computer rooms, telecommunications facilities, clean rooms, data storage areas, offices (for protection of sensitive electronic equipment), boats and vehicles.NOTE: The 5, 11 and 15 1/2lbs. are US Coast Guard approved with bracket listed on the U.L. label.

Carbon Dioxide (CO2) Portable Fire Extinguishers are effective for Class B flammable liquid fires, is electrically non-conductive, and is a clean, non-contaminating odorless gas, safe for use on clothing, equipment, valuable documents and food.

Class D Dry Powder Fire Extinguishers are designed for use on Class D combustible metal fires. Fitted with a "soft-flow" extension applicator which keeps the operator's hands away from the extreme heat and prevents inhalation of toxic fumes caused by burning material. The applicator can be quickly removed to provide a straight stream of chemical where greater range, a narrow discharge pattern or a lobbing effect is required. Comes with a special corrosion resistant yellow (Class D), color-coded paint finish. FM approved.

Class K "Kitchen Use" Wet Chemical Extinguishers contain a special potassium acetate based, low PH agent developed for use with pre-engineered restaurant kitchen systems included in the NFPA 10 1998 edition. The recent trend to more efficient cooking appliances and use of unsaturated cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting capacity and cooling effect to combat these very hot and difficult fires. Unit comes complete with charge.